|
|
 |
Fittings
|
 |
|
Applications
Process instrumentation, High Temperaure and Cryogenic
service, High pressure service, Vacuum service.
Features
Tow errule design.
Stainless Steel, Duplex, Crbon steel, hastelloy,
Alloy400,600,825...
Gaugeaility - Vibration resistance,
Excellent Leak-Free Sealing System in high thermal
stresses and high impulse.
Specifications
Maximum Working Pressure:
9000psi(621bar)@100˚F(38˚F)
Working Temperature Range:
-320˚F to 1200˚F(-196˚C to 649˚C) |
|
|
|
|
 |
i-Fittings
|
 |
|
Applications
Process instrumentation, High Temperaure and Cryogenic
service, High pressure service, Vacuum service.
Features
Tow errule design.
Stainless Steel, Duplex, Crbon steel, hastelloy,
Alloy400,600,825...
Gaugeaility - Vibration resistance,
Excellent Leak-Free Sealing System in high thermal
stresses and high impulse.
Specifications
Maximum Working Pressure:
9000psi(621bar)@100˚F(38˚F)
Working Temperature Range:
-320˚F to 1200˚F(-196˚C to 649˚C) |
|
|
|
|
 |
Tube Fittings
for JIS & KS
|
|
|
Introduction
Bite
type fitting consists of three parts : BODY, SLEEVE and
NUT, and is designed to work over medium and heavy wall
tubing. See Fig.
The make up of the fitting is critical in that the tube must
be bottomed against the tube stop in the body or presetting
tool during make up. If it is not bottomed the tube will
move forward with the sleeve and a bite will not be
achieved.
Make sure the tube is bottomed. A check is possible to see
if the tube was bottomed during make up. To make this
check look at the end of the tube, and notice if a circular
appearing ring has been impressed into the tube end face.
This impression will be caused by the tube stop which has a
slight reverse angle rather than a flat face.
|
|
|
|
|
 |
SAE 37º Tube Fitting
|
|
|
Applications
Hydraulic system.
Features
37˚Flare Seal.
Stainless Steel, Crbon Steel, Brass
According to SAE J514&ISO 8434-2
Useed as hose adapter.
Specifications
Maximum Working Pressure:
8700psi(600bar)@100˚F(38˚F): With O-Ring Type.
5000psi(345bar)@100˚F(38˚F): With O-Ring Type. And according to SAE J514
Working Temperature Range:
Up to 800˚F (427˚C)
Up to 800˚F (427˚C) |
|
|
|
|
|
Bite Type DIN 2353
|
|
|
Applications
Hidraulic, Compressed Air, Fuel Heating, Auto Motive.
Features
Even after repeated disassemble and remake.
Flareless Bite Type Single Cutting Ring design.
Stainless Stell, Carbon Steel, Brass Construction
According to DIN2353 & ISO8434-1
Specifications
Maximum Working Pressure:
Very Light(LL) Series PN100bar
Light(L) Series PN315bar
Heavy(S) Series PN630bar
Working Temperature Range:
-Up to 800˚F (427˚C)
|
|
|
|
|
 |
Fittings & Accessories
|
 |
|
Description
The following table shows the versatility of the Alco range, and the many different types of end connections and options that can be
used to build a valve to suit your requirements. Examine at your leisure the different options displayed below, perhaps you will find
just what you need – if not please do not hesitate to contact us for further details.
Categories
Single & Twin Ferrule Compression
Ring Type Tube Fittings In 316ss & Super Alloys
DIN 2353 Single Ferrule Tube Fittings in 316ss
|
|
|
|
|
| ---->
